Cumond Steam car wash uses steam jet to wash and clean car’s exterior and interior. Steam jet is completely safe on car surfaces when used correctly. Moreover, steam has sanitizing and deodorizing effects. The most special feature of steam car wash is its eco-friendliness.
It takes very little water (<1 gallon per vehicle by average), and it does not cause any wastewater run-off. Steam’s washing power is truly amazing. You will be astonished to see what it can achieve without any chemicals. Our Cumond Steamer was specially designed to wash and clean cars safely and efficiently.
Cumond ES models are virtually mobile, and it will give you the freedom of conducting your cleaning tasks whenever, wherever you want. Cumond Steamer GML series models are 100% environment-friendly. Not only they cause no wastewater run-off, but also they are emission-free. The CUMOND Steamer is easy and fun to use for anyone. It can be also used for other cleaning and disinfecting purposes. The Cumond Steamer is the future of eco-friendly car wash!
Four Big Myths about Steam Car Wash.
Steam car wash is a rather new concept method in the car wash industry, which has been welcomed in many parts of the world thanks to its eco-friendliness and effectiveness.
Don’t know much about steam car wash yet?
Get facts on steam car wash!
Myth # 1: Steam car wash is just a gimmick?
NO! Steam has been used in the cleaning industry for decades thanks to its efficient cleaning and sterilizing power. For example, steam is a well-known method of carpet and upholstery cleaning. Steam readily dissolves deposits on polluted surface. The Cumond Steamer is a commercial and industrial grade machine that can be used for car wash and other general cleaning purposes. An effective steam car wash machine must have sufficient yet safe level of steam pressure, steam temperature, and water flow rate (water consumption rate).
Myth # 2: Steam car wash scratches car surface?
NO!Steam wash will not scratch your car if steam wash is applied correctly. Car wash scratches are often caused by rubbing tiny particles of dirt, sand, and rust against the car surface without removing them properly first. The Cumond Steamer will effectively remove these tiny particles by applying the just right amount of heat, pressure, and water. We recommend only using microfiber mops and towels when drying and polishing. Many car owners have had unpleasant experience of having their car scratched from a tunnel wash or even from using a self-service car wash facility. Steam (gas) is much gentler than high pressure water jet (liquid), and there is no object such as brush in direct contact with the car surface except when mops or towels are used with a minimal force. Overall, steam car wash is much more “scratchproof” than conventional car wash methods.
Myth # 3: Steam car wash damages paint work?
NO! Paints made for automobiles are highly weather resistant and supposed to endure extreme cold and heat. Steam is a form of gas. The very second steam is exposed to the atmosphere, the temperature of steam drops exponentially. In general, the temperature of the steam on the washing surface is well below 100°C (212°F), but the temperature largely depends on the distance between the steam gun’s nozzle tip and the surface (See the chart below). The Cumond Steamer’s steam pressure is preset at 8 bar (116 psi). This is a relatively low pressure rate, but powerful and sufficient enough to wash various surfaces safely and efficiently.
Myth # 4: Steam machines are dangerous to operate?
NO! It is true that steam generating machines must endure high pressure and high temperature. The same goes for high pressure washers which have been used for various car wash applications up until now. Thus, such machines should be manufactured by engineers with expertise in the high pressure and temperature boiler system. The Cumond Steamer was designed with users’ safety in mind. The Cumond Steamer is programmed with automated self-monitoring system. It has multi-stage safety features to ensure the machine operates only within safe pressure and temperature ranges. The Cumond Steamer’s boiler also endures the pressure at up to 4.5 times of the operating pressure rate.
When it comes to cumond steam wash machines, steam pressure and water flow (consumption) rate determine the machines's washing power (F). The Cumond Steamer’s water flow rate is easily adjustable by using the moisture control valve. Per each gun, the water flow rate ranges from 500cc to 1500cc per minute (0.13~0.39 gpm) depending on model and the moisture control valve setting. The Cumond Steamer’s steam pressure is preset at 8 bar (116 psi) [Max.10 bar ( 145 psi)].