1. Voltage decline
Any type of circuit is prone to voltage decline because of the resistance in the conductor (wire). The voltage decrease of the circuit should be minimized to make sure that the electric devices can operate at high performance. Therefore, the cross-sectional location of the cord conductor ought to be large and sufficient to ensure that the voltage drop will certainly not be as big as well as affect the safe operation of the electric equipment. For example, a voltage decline of greater than 10% percent will cause the motor to overheat and also burn out. For an incurable circuit of no more than 100 amps (Amp), the overall voltage decline worth must not surpass 2.5% percent of the voltage score under regular lots.
2. The voltage is low as well low
3. Not enough faucet water
4. The faucet water is dirty
5. The cleaning agent is too focused
6. Water accumulation in diesel cylinders
Due to the buildup of water in the air right into water or due to excessive storage, unintended unloading, and so on 7. Use improper fuels: It is not ideal for high-pressure cleaners to utilize heavy diesel oil, kerosene as well as other gas.
8. Too low pressure is often used
It will impact the very early damage of the high-pressure cleaner components in the managing shutoff as well as bypass valve since they often fall short to reach the fixed pressure.
9. Usage unsuitable devices
Using accessories that are not appropriate for water circulation will directly harm the rubber ring elements in the high pressure pump of the high pressure washer.
10. Replace pump oil
Routine substitute of pump oil can stay clear of present overload or motor getting too hot.