Three questions about car wash shop using steam cleaner
1. Is not enough clean after steam wash?
Steam car wash has its unique thermal decomposition principle. Mild steam can quickly dissolve the sticky properties of sediment and stains, so that it can be removed from the attached car surface for cleaning purposes. With the steam pressure of 15-20Bar, it can directly fuse the decomposed mud and the small amount of steam in the vehicle to 'blow away'. Steam car wash is more careful, because steam cleaning does not have to worry about splashing water, can be close to cleaning, where there is dirt can be directly cleaned at close range. There is no washing effect on the large mud, because the steam washing machine steam pressure is 15-20Bar, the cold water washing machine pressure is 100Bar, and it can't stand the hand directly. Removing large chunks of mud will take longer than cold water cleaning, but removal is absolutely no problem, so it is recommended to wet with micro-water when cleaning large mud, the effect is very good. Steam car wash is more careful and thorough than cold car wash.
2. Is high temperature steam easy to damage car paint?
As we all know, steam car wash is through high temperature and high pressure steam to complete the cleaning process, the internal temperature of the steam car wash equipment is up to 200 degrees, and the steam washing machine steam temperature generated by the steam car washing machine is about 40 degrees, 40 degrees of water vapor will definitely not Car paint caused damage. In the summer sun, the temperature of the black car is more than forty degrees. The vehicle has a paint process in the entire painting process, which is to put the vehicle in the 180-degree paint room for a while. Therefore, steam car wash does not cause damage to the paint. On the contrary, the traditional cold wash is due to the pressure of 100kg, the sand in the water or the large sediment in the car will damage the paint under the pressure of strong pressure.
3. Will there be scratches when washing cars by steam?
Some customers look at the steam car wash when there is a layer of mud on the car and wipe it directly; in fact, the mud on the car has been decomposed under the steam cleaning, the large sand has been washed away, a small amount of fine adhesion very strong dirt A small amount will remain on the vehicle, and the pressure of the washing gun will not be able to flush the dirt. Therefore, the washing has a foaming step. After the foaming, the dirt is removed by the cleaning agent, and then the dirt is moved by the foam and the mop. Achieve the purpose of flushing the dirt. Steam cleaning is to first break down the mud by steam. It is only necessary to use a car wash cloth to move the dirt attached to it. This friction process will not damage the paint. The dirt on the vehicle does not produce fine lines on the paint. The fine lines are caused by the rough friction of the towel, so you only need to buy some fine car wash cloth.
I believe that all of you will have a new understanding of steam car wash after you saw CUMOND's explanation . All the misunderstandings on the steam car wash machine will be slowly eliminated with the knowledge of steam car wash.